JSW Everglow | Premium Colour-Coated Steel Roofing Sheets- JSW Coated Steel

Beautiful inside. Beautiful outside.

JSW Everglow is a premium colour-coated roofing solution engineered for durability, corrosion resistance, and lasting aesthetics. The brand brings beauty and strength together to create roofing that complements your dream home.

Key Features and Benefits

Engineered for long-term value

India's first 20-year warranty

Anti-chalk and anti-fade paint warranty that ensures your roof stays beautiful for decades

ISI approved

A mark of trust and quality that meets national safety and performance standards

Optimum temperature management

Keeps your home cooler by reflecting heat and managing interior temperature effectively

Aluminium-zinc galvalume coating

India's first Galvalume licensee, JSW's AZ-150 coating ensures superior, lasting corrosion resistance

High corrosion resistance

Galvalume® coating combined with paint layers ensures strength in all weather conditions

Mark of high quality

Proven quality through 11 rigorous durability and performance tests

Special high grade

High gloss Super Durable Polyester(SDP) topcoat with RMP basecoat for lasting protection and shine

Unique colours

With everglow's refreshing colour range, you can indulge a bit more when designing your dream home

Accessories

Finishing components for every roof

Plain Ridge

Corner Flashing

Gable Flashing

Eave Gutter

Valley Gutter

Deep Trimes

Down Take Pipe

Storage, handling & Installation

Protection beyond production

Do's

Store indoors and away from open exposure. If kept outside, ensure they are fully protected with waterproof covers.
If not required for immediate use, stack sheets neatly on a raised surface. Maintain a minimum 30 cm clearance between the sheet package and the ground.
Store sheets off the ground with a minimum 50Â° slope (1:10) so that any water entering the cover drains away and does not accumulate.
Inspect the storage area regularly to ensure no moisture has penetrated the stock.
If stacked or bundled products become wet, separate them immediately, wipe with a clean cloth, and restack to dry thoroughly.
Handle sheets carefully to prevent dents, scratches, or edge damage.
Use a spreader bar when lifting long sheets. For small to medium projects without mechanical handling, unload sheets manually and pass them to the roof one at a time.
Always use personal protective equipment, including clean hand gloves and closed shoes, during handling and lifting.

Don't

Don't keep heavy material on stacked sheets to avoid damage.
Don't place sheets vertically without proper support.
Don't use metal chains for lifting sheets.
Don't store material on walking paths. Keep sheet movement paths clear and restrict people from entering the path.
Don't keep sheets in direct contact with soil.
Don't allow the surface to get wet.
Don't slide sheets over rough surfaces or over each other. Always carry tools, donâ€™t drag them.

Do's

Use crest fixing (A) for roofs/walls and valley fixing (B) for walls only.
Ensure groove portions are placed on the inner side to prevent water ingress. (C)
Keep weight evenly distributed across both feet while walking on sheets.
Ensure shoes are clean and free from stones or metal debris.
Follow proper fastener installation procedures.
Paint supporting structures such as tubes, trusses, angles, and channels before fixing sheets (except zinc-coated supports).
Maintain proper tooling alignment and clearance between the mating top and bottom spindle rolls during roll forming to avoid coating damage.
Cut materials on the ground, not over other sheets, to prevent hot particle damage.
Use a power saw with a metal-cutting blade for thin metals to minimise burr and hot particles.
Keep roll forming equipment polished and maintained.
Use neutral cure silicone rubber sealants only.
Ensure rubber washers in self-drilling screws are compatible with roofing and walling materials.
Remove guard film immediately after installation from pre-painted/coated sheets to avoid moisture entrapment.
Clean roofs using clean water or mild detergent with a soft cloth, mop, or soft nylon brush.
Remove metal debris, drill particles, rivet mandrels, and excess fasteners during and after installation to prevent rust stains.
Sweep swarf and debris from the roof after installation.
Dry dirt washes off with rain/high-pressure water; greasy residues require cleaning.
Prevent water entrapment between stacked sheets.
Avoid direct contact between sheets and cement foundations to prevent corrosion.
Remove guard films promptly to avoid moisture condensation and paint peel-off.

Don't

Do not walk on single ribs, sheet ends, gutters, skylights, or unsupported areas.
Do not install roofing during rain.
Do not place groove portions on the outer side.
Do not use stainless steel screws, J-hooks, or carbon washers.
Do not use acetic acid-based sealants.
Do not allow dirt accumulation or leave debris on sheets.
Do not leave metal filings on sheet surfaces.
Do not allow sheets to come in contact with cement.
Do not use abrasive cleaners, solvent cleaners, wire brushes, steel wool, or scourers.
Do not throw bird feed on sheets.
Avoid conditions that cause sheets to become wet or slippery during installation.

MARK OF INGENUITY

Non-erasable liner marking

All genuine JSW Everglow sheets come with special non-erasable liner markings to ensure that you get original, high-quality products.

Guard Film

JSW Everglow branded guard film protects the premium finish during transit and must be removed immediately after installation.

ISI approved

JSW Everglow sheets come with correct thickness and optimum weight.

Applications

Proven performance
across diverse
environments and
industries

Residential Roofing and Cladding

Commercial Offices and Showrooms

JSW COLOURON+

JSW PRAGATI+

LOCATE AUTHORISED DISTRIBUTOR / BRANDED STORES

Beautiful inside. Beautiful outside.

Key Features and Benefits

Engineered for long-term value

India's first 20-year warranty

ISI approved

Optimum temperature management

Aluminium-zinc galvalume coating

High corrosion resistance

Mark of high quality

Special high grade

Unique colours

Colours and Finishes

Select Colours

Select Colours

Technical specifications

Accessories

Finishing components for every roof

Plain Ridge

Corner Flashing

Gable Flashing

Eave Gutter

Valley Gutter

Deep Trimes

Down Take Pipe

Storage, handling & Installation

Protection beyond production

Do's

Don't

Do's

Don't

MARK OF INGENUITY

Non-erasable liner marking

Guard Film

ISI approved

Applications

Proven performance
across diverse
environments and
industries

We Use Cookies

Beautiful inside. Beautiful outside.

Key Features and Benefits

Engineered for long-term value

India's first 20-year warranty

ISI approved

Optimum temperature management

Aluminium-zinc galvalume coating

High corrosion resistance

Mark of high quality

Special high grade

Unique colours

Colours and Finishes

Select Colours

Select Colours

Technical specifications

Accessories

Finishing components for every roof

Plain Ridge

Corner Flashing

Gable Flashing

Eave Gutter

Valley Gutter

Deep Trimes

Down Take Pipe

Storage, handling & Installation

Protection beyond production

Do's

Don't

Do's

Don't

MARK OF INGENUITY

Non-erasable liner marking

Guard Film

ISI approved

Applications

Proven performance across diverse environments and industries

We Use Cookies

Proven performance
across diverse
environments and
industries