JSW Silveron+ | Aluminium-Zinc Coated Roofing Steel- JSW Coated Steel

Premium Al-Zn sheets

JSW Silveron+ is a premium roofing solution made with an advanced Aluminium-Zinc-Silicon alloy coating, offering superior anti-corrosion protection and up to 3X longer life than conventional zinc-coated sheets. Its lightweight design, excellent heat reflectivity, and rupture resistance make it ideal for residential, commercial, and industrial roofing and wall profiles.

Key Features and Benefits

Steel you can depend on

Anti-corrosion technology

Advanced Aluminum -Zinc alloy coating provides superior scratch protection and restricts corrosion

All-weather protection

Withstands heavy rains, salty coastal air, snow, and extreme heat

Optimum temperature management

High surface reflectivity keeps interiors cooler, saving on energy costs

ISI approved

ndia's first ISI approved Galvalume sheet, demonstrating commitment to global quality

Eco-friendly

Heat-reflective surface reduces smog formation and lowers the carbon footprint

Longevity and lower maintenance cost

Two to four times longer lifespan than standard GI steel with minimal upkeep ensures maximum value

Al-Zn coating

India's first Galvalume® licensee ensures superior Al-Zn coating for extended durability in harsh weather

Advance technology

Utilises the latest indigenous and international technology for the highest coated steel quality

Storage, handling & Installation

Protection beyond production

Do's

Store indoors and away from open exposure. If kept outside, ensure they are fully protected with waterproof covers.
If not required for immediate use, stack sheets neatly on a raised surface. Maintain a minimum 30 cm clearance between the sheet package and the ground.
Store sheets off the ground with a minimum 50Â° slope (1:10) so that any water entering the cover drains away and does not accumulate.
Inspect the storage area regularly to ensure no moisture has penetrated the stock.
If stacked or bundled products become wet, separate them immediately, wipe with a clean cloth, and restack to dry thoroughly.
Handle sheets carefully to prevent dents, scratches, or edge damage.
Use a spreader bar when lifting long sheets. For small to medium projects without mechanical handling, unload sheets manually and pass them to the roof one at a time.
Always use personal protective equipment, including clean hand gloves and closed shoes, during handling and lifting.

Don't

Don't keep heavy material on stacked sheets to avoid damage.
Don't place sheets vertically without proper support.
Don't use metal chains for lifting sheets.
Don't store material on walking paths. Keep sheet movement paths clear and restrict people from entering the path.
Don't keep sheets in direct contact with soil.
Don't allow the surface to get wet.
Don't slide sheets over rough surfaces or over each other. Always carry tools, donâ€™t drag them.

Do's

Use crest fixing (A) for roofs/walls and valley fixing (B) for walls only.
Ensure groove portions are placed on the inner side to prevent water ingress. (C)
Keep weight evenly distributed across both feet while walking on sheets.
Ensure shoes are clean and free from stones or metal debris.
Follow proper fastener installation procedures.
Paint supporting structures such as tubes, trusses, angles, and channels before fixing sheets (except zinc-coated supports).
Maintain proper tooling alignment and clearance between the mating top and bottom spindle rolls during roll forming to avoid coating damage.
Cut materials on the ground, not over other sheets, to prevent hot particle damage.
Use a power saw with a metal-cutting blade for thin metals to minimise burr and hot particles.
Keep roll forming equipment polished and maintained.
Use neutral cure silicone rubber sealants only.
Ensure rubber washers in self-drilling screws are compatible with roofing and walling materials.
Remove guard film immediately after installation from pre-painted/coated sheets to avoid moisture entrapment.
Clean roofs using clean water or mild detergent with a soft cloth, mop, or soft nylon brush.
Remove metal debris, drill particles, rivet mandrels, and excess fasteners during and after installation to prevent rust stains.
Sweep swarf and debris from the roof after installation.
Dry dirt washes off with rain/high-pressure water; greasy residues require cleaning.
Prevent water entrapment between stacked sheets.
Avoid direct contact between sheets and cement foundations to prevent corrosion.
Remove guard films promptly to avoid moisture condensation and paint peel-off.

Don't

Do not walk on single ribs, sheet ends, gutters, skylights, or unsupported areas.
Do not install roofing during rain.
Do not place groove portions on the outer side.
Do not use stainless steel screws, J-hooks, or carbon washers.
Do not use acetic acid-based sealants.
Do not allow dirt accumulation or leave debris on sheets.
Do not leave metal filings on sheet surfaces.
Do not allow sheets to come in contact with cement.
Do not use abrasive cleaners, solvent cleaners, wire brushes, steel wool, or scourers.
Do not throw bird feed on sheets.
Avoid conditions that cause sheets to become wet or slippery during installation.

MARK OF INGENUITY

Liner marking

All genuine JSW Silveron+ sheets come with special liner markings to ensure that you get original, high-quality products.

ISI CERTIFIED

India’s first ISI-certified bare Galvalume sheet, featuring the ISI mark as a guarantee of superior durability, heat reflectivity, and corrosion resistance.

Applications

Proven performance across diverse environments and industries

Industrial Warehouses, Solar Panel Mounting Structures and Silos

JSW PLATINA

JSW MAGSURE

LOCATE AUTHORISED DISTRIBUTOR / BRANDED STORES

Premium Al-Zn sheets

Key Features and Benefits

Steel you can depend on

Anti-corrosion technology

All-weather protection

Optimum temperature management

ISI approved

Eco-friendly

Longevity and lower maintenance cost

Al-Zn coating

Advance technology

Technical specifications

Storage, handling & Installation

Protection beyond production

Do's

Don't

Do's

Don't

MARK OF INGENUITY

Liner marking

ISI CERTIFIED

Applications

Proven performance across diverse environments and industries

We Use Cookies